MF01
Plan 1 - 填充
說明:
Start by setting 2+1 advances entry points to see the fill status for later correction.
材料:
ABS
重量:
410g
填充(中心射壓):
141
翹曲(Z最大):
+0.9
-0.2
MF01
Plan 1 - 翹曲
說明:
Start by setting 2+1 advances entry points to see the fill status for later correction.
材料:
ABS
重量:
410g
填充(中心射壓):
141
翹曲(Z最大):
+0.9
-0.2
MF01
Plan 2 -填充
說明:
Not enough on both 2 sides, the middle of position is overfull, then change into 3+1 entry points.
材料:
ABS
重量:
410g
填充(中心射壓):
140
翹曲(Z最大):
+0.9
-0.7
MF01
Plan 2 - 翹曲
說明:
Not enough on both 2 sides, the middle of position is overfull, then change into 3+1 entry points.
材料:
ABS
重量:
410g
填充(中心射壓):
140
翹曲(Z最大):
+0.9
-0.7
MF01
Plan 3 -填充
說明:
Try to use 2+2 entry point for reducing the injection pressure and warpage deformation.
材料:
ABS
重量:
410g
填充(中心射壓):
135
翹曲(Z最大):
+0.7
-0.7
MF01
Plan 3 - 翹曲
說明:
Try to use 2+2 entry point for reducing the injection pressure and warpage deformation.
材料:
ABS
重量:
410g
填充(中心射壓):
135
翹曲(Z最大):
+0.7
-0.7
MF01
Plan 4 - 填充
說明:
Considering the welding line on appearance surface, so change to 4+1 entry points. The welding line on surface is not visible, the injection pressure and deformation are also good.
材料:
ABS
重量:
410g
填充(中心射壓):
133
翹曲(Z最大):
+0.8
-0.6
MF01
Plan 4 - 翹曲
說明:
Considering the welding line on appearance surface, so change to 4+1 entry points. The welding line on surface is not visible, the injection pressure and deformation are also good.
材料:
ABS
重量:
410g
填充(中心射壓):
133
翹曲(Z最大):
+0.8
-0.6
